1000 l barrel pump
Price on request
1000 l barrel pump
ATN’s VRP four-column RAM press is designed to deliver glues, sealants and fillers in a wide range of viscosities. This press is suitable for 1000 l barrels with a diameter of 1 to 1.10 m.
The standardized pneumatic barrel hoist is operated via an intelligent control box. This is located on the RAM press itself and is operated via a membrane keypad.
A pneumatic piston drive with air motors drives the two twin-stroke scoop piston base pumps.
The air motors and scoop piston base pumps are mounted on a follower plate which is pushed into the barrel by a pneumatic cylinder.
The air motor size, feed rate, base pump material, and the pressure of the pneumatic cylinder of the air motor in the pneumatic box can all be customized to suit your requirements.
The whole pump is unheated and can be supplied with optional heating. Where applicable, the heating controller is located in the control box, which can be used to adjust the heating temperature. The press is suitable for low- to high-viscosity materials.
The base pump can be vented for barrel changes. This ensures that no air becomes trapped in the system during a barrel change. The press has integrated roller tracks on both sides so that forklifts can easily insert and remove material barrels.
| Areas of application: | Body shell sealing and insulation |
|---|---|
| Feed rate:: | max. 18 l/min at 16 twin-strokes |
| Transmission ratio: | 30:1 (pneumatic pressure to static material pressure) |
Functional extensions:
- Stainless steel version available for water-based-acrylates
- Can be extended to a twin (eight-column) system