Glue application system configurator

ATN application systems accommodate virtually any flowable material in a host of different gluing processes. We provide glue application systems based on your process and requirements, using components from our application technology range.

Configure your glue application system now and request a tailored quotation.
*The product may differ from the picture

Design and function principle

The glue application system for use with 2-component glues consists of a double barrel pump for component A (01) and another for component B (02). The pumps convey each material from the barrels. The system is controlled by an IFC central application controller (01). Material or heated hoses convey components A and B to the electronic volumetric dosing systems (EVDs 02/03), which dose the exact quantity of material required for the optimum mixing ratio. In the 2C applicator (05), the two components are perfectly combined in a mixer and discharged in a round bead. Both the electronic volumetric dosing system and the applicator are mounted on an application tower (not shown in illustration). All components that contain material can be heated to optimize material flow. All components of the glue application system are designed, sized and fitted with suitable heating for your specific use case and the material to be processed.

Features

  • Uninterrupted material delivery through intelligently controlled double barrel pumps for components A and B
  • Central system control and monitoring via IFC operator panel
  • Reliable material metering through electronic volumetric dosing systems
  • Uniform, repeatable beads in the desired mixing ratio through 2C applicator
  • All system components are heatable to ensure ideal material handling

Price on request

1. Material
What type of glue do you want to use? Select a one-or two-component glue and specify whether you would like a booster admixture for faster hardening.
Our experts at the ATN test centre will design your glue application system based on the exact chemical properties of your glue.
2. Glue bead
What glue discharge form would you like? ATN systems can discharge traditional round beads, or profile beads in various geometries, e.g. triangular
3. Automation
What level of automation would you like in your glue application system? You can choose between a stationary setup where the application nozzles are mounted on an application tower, or integrate a robot for maximum flexibility in your glue application process.
Chosen variant:
2-component glue, Round bead, Tower
Request an offer
Product number: Kleben-03